3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter 1

3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter 2

3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter 3

3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter

All-in-One for On-Grid & Off-Grid Residential PV System, Maximize Solar Self-Consumption

The 3.6KU hybrid inverter is a compact residential energy storage solution rated at 3.6kW nominal output power. Built with pure sine wave output technology, it delivers stable, clean AC power safe for all home electrical appliances and achieves a full power factor of 1.0 for optimal energy utilization. Equipped with a built-in LCD display, users can easily check running status, PV generation data and battery conditions on site without extra devices.

This all-in-one hybrid unit combines MPPT solar charging, battery inverter and grid-connected control functions. It intelligently distributes solar power: prioritizing power supply to household loads, storing surplus energy into batteries, and releasing stored electricity at night or during grid failures. Suitable for small homes, villas and off-grid residences, it effectively improves solar self-consumption rate, reduces reliance on utility grid and provides reliable emergency backup power. The integrated full protection system ensures long-term stable outdoor operation for residential PV storage projects.

Model:

S-3.6KU

Inquiry

Write a Review

Recommended max. PV power

4800W

Maximum number of PV source circuits

Maximum input and output voltage

PV input 120–500V; AC output 230V

Number of AC input circuits

Product name

3.6KU Single Phase Hybrid Solar Inverter

Rated voltage

230Vac

Supported device type

Hybrid String Solar Inverter

Data collection intervals

5 mins

Number of connected inverters

Surge protection

DC & AC Type II SPD surge protection

Ingress protection

IP20

Rated grid frequency

50Hz / 60Hz auto switch

Max. operation altitude

3000m

Communication

WiFi, RS485

Product Introduction

Our 3.6KU hybrid inverter is a 3.6kW single-phase energy storage inverter designed for household solar storage systems. Adopting pure sine wave AC output with power factor up to 1.0, it comes with an intuitive LCD screen for real-time parameter viewing.

3.6kW compact hybrid inverter with pure sine wave output & PF=1.0, supplies stable clean power for all household devices
Built-in LCD screen for real-time viewing of PV generation, battery status and operating data
All-in-one design integrating MPPT solar charge, battery inversion and grid connection control
Smart energy distribution: supply loads first, store excess power in batteries, release power for night use or blackout backup
Greatly boost solar self-consumption and cut grid electricity consumption

Complete integrated protection system for long stable service, ideal for home & villa solar storage systems

Product Display

离网高频逆变器10

离网高频逆变器7

Application Scenario

3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter 7

美图设计室变清晰_2024_11_11 (5) (2)

3.6KU Single Phase Hybrid Solar Inverter, Pure Sine Wave Output, LCD Display, PF 1.0 Home Energy Storage Inverter 9

美图设计室变清晰_2024_11_11 (3)

Get in touch with us

just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs